Busy person also today

I must check the service manual for BC7 SUBARU Legacy LSi US model from now, because the cooling fans continue running while not in over heating but in normal condition in spite of bubble removing work had been performing so carefully as taking time repeatedly. The reaction of electric fans that the phenomena stops after restarting of EJ22 motor shows the action should be controlled not by mechanical reason but be done by some electric especially software?
Of course a cooling water temperature sensor might have something to do with the inconvenience, in addition to an electric fan mechanical relay.

First of all checking the diagnosis restored in ECU have to be done seeking the fault or faults, cooling water sensor defect should be shown as Morse signal #21 by flushing the check engine lamp, in addition to the former procedure by connecting black 2P coupler, the unconnected 2P green coupler would perform self-diagnosis immediately after connection with the performance of decided recipe by the factory design probably following Bosch patents. As for mechanical parts replacement, thermal sensor for ECU & mechanical thermostat controlled at 78 degree Celsius would be replaced after the checking on the poor contact between the terminals promptly.
Some ECU signal might be mischievous to trigger the strange phenomena this time, so I feel.

Though I worked on hard muscle task to move heavy refrigerator from Mino to my villa at Nakayama in addition to my occupation, I have to work for drive shaft replacement on NCP10 TOYOTA Vitz, as noisy defected ones are waiting for the turn letting of the numbers, of course the replacement parts are ready for that after replacing included chrome molybdenum grease following the information, too much moistened grease called rusting of internal mechanism.

The wanted planning of moving Takara Axis90 working chair from Mino to our new laboratory was postponed till coming Thursday, because of lack of the workers, 2 men and a woman were not enough to pull up the weight of 136kg gravity, one or more professionals are necessary. Only the X-Ray device, Siemens Heliomat KV70 was removed and brought to my villa.
At that time I knew special information for moving any refrigerator, it should not be activated by electric plug in causing inconvenient mechanical phenomena  because of the necessity for stable positioning of the refrigerant inside.