Mount replacement

I dare forced myself to go ahead on lazy task on XH200W Opel B-Vectra, Eg mount rear part replacement. The task is so troublesome as to take much time comparing with another automobile. Worst memory was taking three days to replace radiator if the same task on EP82 TOYOTA Starlet, 30 minutes to 1 hour at the longest.

Anyway the convenience is not considered little for after cares. Small tiny parts replacement takes time incredibly.

From early in the morning till dark it took time as usual today.

Thanks to a very special tool, Merry Barrier Wrench, no disassembling of intake manifold from Eg head was necessary.

Approaching from the bottom, removing from upper Eg mount with stay parts together, inserting new parts from upper and tightening from the bottom.

ST used today has very simple constructive design, upper drive and lower wrench drive is connected with chaine without stopping tooth nor complicated follower designs. With all 1/2 inch type one could be used for final tightening solid and strong wrench.