Interesting attempt

New parts BOSCH genuine distributor equipped with vacuum advance arrived from Mybows Tokyo yesterday.
Comparing with 009 without vacuum advancer only with centrifugal mechanical advancer, the physical property would be far improved especially the transient from idling to medium motor rotation.
Now with 009 lack of vacuum advancer causes some stumbling and hesitation, though high rotation has no problem.
Descriptions later.

Rear window seal rubber was relined with silicon coking material preventing roof leak and rusted floor was cleaned for the next repairing steps.

Clutch wire was lubricated with splay grease and linkages including pedals also.

Amp meter bracket was re-tightened at the original position on the lower dashboard repairing illumination circuitry.
Without this meter activation the ignition relay does not work,so
in case of failure of this meter with open circuitry shortening application is required to start.

Alternator model has no Amp meter,I must consult the difference between alternator and generator, former is alternative and latter's direct currents promptly.

The arrangement of air vents on rear C pillars inside must be considered,because the number of the plastic parts is 6 instead of actual holes are 8 on earth?

The beige color rubber sheet prepared would play a good part of insulation enough form the rear engine room and from the ground.
The steel sheet utilizing the old washing machine case would be adhered finally to the floor panel with silicon coking material.