Deeper inspections on the useage of industrial hoses revealed that that SUPER TOYORON is not so favorable for ATF line because of the limited temperature, 60 Celsius, ATF would come to 130 Celsius so often. So another material must be set on that line, naturally Fosso rubber, inner line forcing pipe must be set if the original hose, shorter for new wider nipple distance, is used for the pressure of a clip band. So many industrial materials exist for the purposes promptly, just I studied on this field. Engineers in specific field are probably exert themselves in researching like this.
Though I looked for rubber hose for ATF oil line to upper nipple on oil cooled left side, adequate diameter 9,5mm hose was not found out today. Formed hose is not always necessary there but straight one is enough if the diameter was adaptable, 8mm for fuel line on injection model is too small. So relatively longer straight hose with 9,5mm diameter may be available in genuine parts.
But 5,5j/15/ 25 off steel wheels for VW Beetle were obtained at last today.
0 件のコメント:
コメントを投稿