Mistook!

I came across with the terrible scenery, the cabin of VW 1302 Super Beetle was filled with strong fuel smell, how come?
This had been my own business with big mistake!
I applied butyl rubber self-welding tape in addition with genuine rubber tape lust Thursday. Some clearance must be formed after coupling with outer rubber connecting hose with closing metal band. I found out the butyl rubber material had been melted in sol state with organic solvent gasoline!

Basically the fuel inlet metal pipe must be fixed at the adequate position decided by the rubber round grommet, and in the scenery of fixing it, the fuel tank could not exist on the position, because some special efforts without any obstacles must be required to set the inlet metal hose.

No argument! It's my own fault! Do that following the concept, by-step!
Remove the residual fuel from the tank, remove the thank once from the mounting position, fix the inlet metal pipe at the adequate position in relations with rubber grommet.
Remember the hard wears including binding bands must be prepared on the inlet pipe previously, don't leave what must be done if they were complicated and boring tasks, otherwise the more hardships would be waiting in future.