Extension

Only 40mm extension on the tip of shift lever causes considerable difference of shift feel, the phenomena on the shift corn and synchronizer. So, the balance of compliance is required here too.
The ordinal passenger cars could be regarded as a mass of balance.
The pitch of shift lever for knob is very rare,1,50mm, not 1,75 nor 1,25.
Now pitch 1,75mm is used temporally, leading to the fact that tightening is difficult because of the small difference between them.
Today some alternative bolt 12mm with 1,50mm pitch are obtained for the purpose.
Trial fitting would be continued on the length of shift lever extension.