I just came back home from Netz TOYOTA after checking the exhaust gas emission test. The obtained datum, Carbon-oxide 0,11% and Hydrocarbon 670ppm fully comply with the regulation enough, CO 4,5% and HC 1200ppm. Though I adjusted the air volume mixture screw toward closing clockwise direction to make it richer in accordance with colder temperature these days, the margin for CO limitation still much remains to satisfy the regulation. As coming Thursday is prepared for inspection test turning around every 2 years, I had to check exhaust emission prior to the ongoing public automobile inspection. I just remembered that the rear seat cushion removal is necessary for air-cooled Beetle to be checked body number. Window screen shower is so modified that Radio-control model airplane field fuel supply electric pump that is 12V activated is set on the way from water saving tank to spraying nozzle. Original design is utilizing the pressure of spare tire's one, not so reliable so I changed. Frontal wheel alignment is so set that side slipping value at 0 mm with 20minutes negative camber on both side in the condition of driver's weight at the seat portion. All the bulbs are alive including head lights and tail light, emergency signal lights at the corners and back up lump when the reverse gear is selected. Speed meter at 40km is very accurate with the verification of GPS system. Horn is OK.
Don't forget to bring with Tax certificate and stamp seal. As I am going to Kobe Kinki Branch Department of Motor Vehicle, I would drop in some famous restaurant for lunch on the way home.
0 件のコメント:
コメントを投稿