R/C Golden Age meeting at Toyooka in Hyogo Pref.

I have participated in Radio Control model airplane Golden Age meeting at Toyooka in Northern Hyogo prefecture, that was held for two days.
My airplane was PILOT Ace B with high wing construction, it means that the construction is not so convenient for required maneuver among admirable Golden Age stunt models such as Mach, Curare, Olive, Fuji, Marabu, Thunder bird, Quick Fly and so on. No other participant but me brought any high wing type model at all.
My desperate effort got 7th place in spite of a bad score yesterday. To tell the truth, I had a primitive mistake, the rudder servo was reversed that had been replaced into an another product because of the fracture of the body case part.
Consequently, any rudder directional adjustment was forbidden at all in Rudder reversed condition, this is why my bad score yesterday, I feel shame so much about this affair.
In addition, OS 32 FX had some worn symptom that had been obtained at 1,700 yen as a junk, difficulty in finger flip starting because of compression leak, but it worked fine in 2 actual game, no prepared motor starter machine was called for starting.
Though I was enjoying to participate in the meeting just as one of an applicant, I was obliged to be a Judge except my number.
As I could not escape in to some shading place because of the reason, I was burned like a reddish Octopus, my face now is reddish as if I am a drunk.
An ordinary judge checks the maneuver score inviting the deductive pointing method, but I did it by additional point method, so all the score that I did is relatively higher than another judges.
Thanks to the Organizer, Mr. Okamoto of the Golden Age meeting we all could enjoy all the time as long as 2 days with the bottom of our hearts.
We all would give him our best wishes and thanks, and we hope this kind of interesting meeting would be continued so long.

Worthy meeting yesterday

I had a great time with a very important person who had been in a top of the AI and VR field, the time interval lasted as long as 6 hours.
He had the experience to work with some researchers in National Universities and he show the articles about that prior to our meeting.
Checking the articles, the contents was not so movable as I desired.  The direction of the research is not clear, but abstract just to prove that they did something new with collaborations.
Official terminology, Orthopantomograph should be invited in the article, this is a common sense, but Panoramic Radiograph was used that is commonly used among the ordinary general practitioners. They are not a GP but a researcher, no?
They should feel some shame to have used such a unsuitable word in the article that would retain in future.
I'm afraid to say that the method of Orthopantomography lacks the accuracy because of the basic concept of Tomography producing mm order distorted discrepancy, so the method is not appropriate  to be used as a reliable reference.
Also, no further following experimental research is shown  by them since the first publication in 2010, just a single shot one. They just wanted to be a pioneer of the collaboration?
Any research that has no purpose with no clear direction to go easily looses speed and stalls finally.
The purpose to meet with him yesterday is not to obtain some selfish reputation for myself, but to contribute myself to their professional " Facial Recognition System" showing some technique to change the Face.
There exists some discrepancy of recognition each other even after 6 hours lasted meeting. The continuation would be done if there is a future opportunity.

Visiting the Face Recognition Laboratory Room tomorrow

As I'm going to visit the Laboratory Room of a very special person tomorrow, I studied a bit about "Face Recognition", he is now in the most sophisticated position in their field. So, the visitor who is an ignorant like an infant might be very impolite at all. I should know about their field not a little, how much effort was required to come to a now a days situation and what kind of method of recognition are reported till now. I can imagine how much difficulty was overcome to come the situation now.
Probably, would talk about a disguised spay changing some part of face.
The way to do that is not always depended on the change of layout such as that of eyes and eyebrow, nose tip, lip figure, and constructive ratios.
What I could propose about the changing some scaling position, change of upper incisor position by wearing some additional artificial surfaces on the innate anterior buccal surfaces, 2 to 3 mm movement to anterior direction is enough to change into a completely different personality.
Also the change of centric occlusion jaw position to 1 cm higher does the same, aspect ratio change causes a person to be a different person.
The change of the Upper Anterior position and increase of the vertical dimension of centric occlusion are the easiest way of disguise from our professional standing point of view.
Contrary, the accuracy of Face Recognition system would make progress if my proposal about disguise mentioned above is programmed additionally as a variable factor.
We will talk about that tomorrow.

Difficulty in mixture control

Adjusting OS 3H carburetor on OS 32 FX in an unstable condition because of some banish and dust clogging at the nozzle portion, I found out some physical tendency that the rate of muffler pressure affect on the A/F mixture at middle speed rotation. The diameter of the muffler pressure nipple affect on the mixture control,in relation with the fuel squeezing mechanism.They have much to do with the rotational condition, hi-middle-low transition.
In case I invite YS fuel pressurized regulating system, such kind of nervous and precise adjustment is not required, only the regulator adjsuting screw angular position is the key to control in addition to the lowest mixture. As for lowest mixture, I would often the best adjustin screw position when spining maneurver, stops or continues.
YS system does not require any sensitive adjustment except regulator, also muffler pressure nipple is replaced into closing hole screw.
I preferr YS system to ordinary muffler pressurizing fule supply however another manufacturer's motor is burdened on my model airplane.
My OS 25 LA motor has pressure nipple to invite it to YS regulator with good operation and response at any rotation, also this small motor has a history to be modified increasing main Schnurle port by myself following OS 25 FSR, and the operating performances are almost the same if used under 13,000 RPM, the advantage of LA model is lighter weight.

Carburetor clogging

The carburetor in model motor often causes fuel piping circuitry clogging if it isn't used as long as half a year interval.
At the time when I brought PILOT Ace B with OS 32 FX motor burdened 3H carburetor, such kind of problem was found.
The phenomena is like that, main needle response is dull, the rotation at hi-speed needed to make the mixture rich required much loosing turns. In order to obtain some necessary RPM keeping richer condition the needle position was changed into more opened angular position compared with the usual angle. Also, fuel squeezing at lowest speed was changed into more opened position.
This kind of unusually unstable fuel control is caused by the clogging error in the carburetor or fuel piping circuitry, according to my long experience can I conclude like this.
The competition meeting at Toyooka would be held at the end of this week that is the last meeting to be held there, no more meeting at Toyooka in future for the convenience of the Government Office.
The maintenance work for the carburetor would be performed today and the result would be tested tomorrow keeping the best condition.
The broken micro servo for rudder control is replaced into a more stout mini servo, E-Max 9258, driven at 4.8 V with metal gear hi-speed.
Because I didn't have a adequate servo at that time, chose I a tiny micro servo while fearing with the reason of operating torque, a weak case construction came into breakage, the load at rudder control in addition to the nose gear connection was too heavy and too destructive for a smallest micro servo. Too much burdening on the weak mechanical construction led to some fundamental decay as a matter of fact.
Remembering my past bitter experience, a poor and weak flying tail construction on the horizontal stabilizer in YSHIOKA Pegasus Acro led to breakage at that portion and it was lost completely with missing.
Anyway, too weak construction led to an accident wherever it might be.

Piled difficulty in front of me

Publication in English language is considered in addition to Japanese. Probably it would take me more few month from now, 100,000 Japanese letters into English is not always an easy task for me, with not ordinary expression but some formal and academic way of that.
The terminology in our field is not so difficult because I had some communications with US experts in some Medical center in the state of Washington, UCLA and USC.
More harder works are waiting for me, I must do that if it is decided.
Taking photos work in the clinical procedures must be overcome at any rate soon.
Though I determined to retire from my field a year ago, my working as a researcher began again, in comparison, I'm far busier than before 30 years ago, how come?
Thank to the relation with my intimate friend, one of my the most admirable person, I could make some appointment to visit the Laboratory Room in Grand Front Umeda Osaka.
There must be tremendous information that has much to do with my researching now.

Heater like Tube Amplifier

Tube low frequency amplifier driven by 2A3 produces some heat and I feel too warm in my room in this beginning of Summer season. Though it has 6FQ7 and 6AQ8 as its initial stage tube, single stereo design, they also have heater.
The transformer does the same. It is convenient in Winter season but these days not so.
Because a small tip plays a part of the audio amplifier now, I'm going to construct some new circuitry. My working place situates the position that is relatively near from Nipponbashi Osaka, 20 minutes by train. So, a procurement of any Semiconductor, capacitor and resistor is done like nothing.
I'll do that till the end of this month.
My writing work is almost over, total amount of 203.2 kilobyte with Japanese letters of 100,000 in total.
It took me about 30 days to do that and the time passed like an arrow.

Alfred Adler's way

A day passes like nothing these days, in spite of my freedom circumstance after retiring from my occupation, I feel like spending my past life in a researcher's period of time. Remembering my passed about 30 years ago, it floats up clearly and gradually accompanying with another memories at the same time.
But for this opportunity to write a book again about my researches and related matters, this kind of experience could not been acquired now at all.
In addition, some bad memories come up also, but I made up my mind to rearrange them into the better matters, bad into not so bad. The perception at that time is changed from bad to not so bad, then my situation now is changed into better and my emotional condition becomes stable.
This is one of a Psychological way by Alfred Adler. If the worse passed is changed in perception, the thinking way now is changed, then our future would be changed into better.
The individual passed does not always construct and form the life style now, if the life now is based on the worse experiences, the future is continued like now accompanying the worse passed.
Then, changing the perception in the passed would change the life style now, the life would be changed in any directions with no relations with the worse passed.
I determined to follow the way of Adler unconditionally.

A layman photographer or a Specialist?

I had an opportunity to talk with the Genius Expert who is specialized in the sophisticated State-of-the arts in Multimedia Technology.
Because my former occupation in the University have deep relation with his own researches, we talked deeper and deeper as long as 2 hours.
Suddenly we realized why are we talking about this kind of professional titles, then we basted into laughter, we should have talked about photographs instead.
After that I had some curiosity, he was on of a student exhibitor of the Still Photography there, how come.
I would be consented to the condition that he had been invited by Fuji Film Co. as an invited Professor for their research and developing division engineers.
Why did he there pretending as an infant photographic student?
Judging from his biography, he had lead his life as a state-of -the- art researcher specialized in Telegraph & Telecommunication and now he is doing in Virtual Reality,  Multimedia User Interface including 3D and Multi modal.
He is second to none in any images field.
I would like to inquire when I visit his Lab room about his attitude to be a layman photographic student.

A spider

I found out a strange spider in my garden with the size of 5 cm width, I didn't kill it with no harm. Because of some poisoning effect when I am hurt, I would often kill and destroy it immediately.
But the taught by Buddhism never permit to kill any living thing at all, following it, I pretend that I didn't come across with it.
No living thing on the Earth does not exist without any reason.
The possibility to appear here as an insect is very very few, it come here with conquering many hardships.
Probably the similarity of Genome of this insect must be over 95% with myself.
We have developed our frontal lobe, then are we the first on the Earth?
Do we have enough reason to destroy any other living ting because of our selfish convenience under the permission of God?
Such kind of doubt came up in my mind.
Spider never attack a man except the condition of being attacked.

Ohmi -Hachiman at Siga prefecture

In the middle of the last month, April, visited I one of the most famous place around Biwa-Lake. I happened to the occasion of  a movie location in Edo period at Ohmi Hachiman. All of the actors and actresses were in Kimono Dress in addition, their hair style were all in Chommage and Nippon-Gami for males and females promptly.
I refrained from taking photo of the movie scenery spontaneously, because I could recommend their desperate effort by not only by the performer but also by the many stuff there.
Just a tourist coming across the chance is not allowed to cheat the worthy shutter chance. I could understand how much effort was required to make up the Edo period stage equipment, from dark early in the morning till evening.
I could do that after asking to give me a permission, not the performer but a piece of some old fashioned gadgets.
The action were performed just in front of Kihei, that is one of the most famous Japanese special restaurant.
My purpose was Kihei and taking a ride in Japanese hand lowing boat under the Cherry Blossoms in full bloom.
The representative of the restaurant is a very friendly with open heart and smiling all the time, giving me some motivation and energy every time.
I promise that the visitor would not be disappointed, sure.

Now Summer season in Japan

Every worm and insect starts to be active these warmer days, butterflies and bees are flying about in my garden. I am surprised to be flown across to my face by a black swallowtail butterfly. I'm afraid of a big bear bee so much coming just near by me.
My writing work is covered about 70 %, remembering my passed memories that is just like yesterday, actually the time interval 30 years has passed already now.
As I have deserted all the documents and silver-salt transparencies last year, additional works to taking photos for the new publication.
All most of them would be obtained if I make up my mind utilizing my son's working place, I got the permission to do that.
But he is not always willing to publish my book, because much of hidden know-hows are exhibited in it. He insists not to do that.
The compromise is publishing it in English only but not Japanese language.
If the book is written in English, most of Japanese would not read out through.
US Mosby publishing company is in my mind.
Probably, a Professor who is my long lasting intimate friend would give me a better answer.