2021年2月19日金曜日

Air-cooled Super Beetle legal inspection

Air-cooled VW Super Beetle 1302 came across with the moment of Legal periodical inspection done in every 2 years at Kobe Hyogo Land Transport Bureau Audit Department. The appointment had been done 2 weeks prior to the date through internet booking, inspection is acceptable prior to one month from the limited day. The problems were spotted on the rear right light no reaction and the exhaust gas checking Hydrocarbon with 3,200 PPM. Former one was solved while moving on the checking line, the inspector noticed the change and he corrected the score bad to good. Latter one required three times trials before passing the exam. Remembering the past, 50 years ago, Yanase dealer had the counter measure to adopt the target value, below 1,200 PPM, the ignition timing was delayed 5 degree at BTDC. 1971 was the most complicated period of time, because the Exhaust Gas Regulations had been invited, as the fact and proof, the distributor in my 1302 had the 2 way vacuum control diaphragms, advancer and delayer, it's nothing but queer scenery. There is no way to obtain such a supply part in the world, and the regulation is applied only on the vehicle manufacturers not for the user of the car, consequently now a normal vacuum advancer is set on my ignition timing distributor. T Though I was tired of 3 times trials through lunch time taking 4 hours, I made up my mind to visit Tamba where my ancestor's grave is, because I felt some emotional assistance by the grand pa and ma. There was some complete different scenery at deep in the mountain, so cold and snowy almost white-out without eyesight, probably the last opportunity for me to be encountered this winter season. The lens invited here was Kenko MC Soft 85 mm/2.5 with adjustable "Bokeh" control being obtained at 4,000 yen through Yahoo Auction in good conditioned but with innate disfunction of infinity helicoid relational fixation leading to longer minimum distance at 3 m & over-infinity, this malfunction was corrected by my DIY work resulting in 1.5 m min distance establishing correct infinity angular position of focusing ring.

0 件のコメント:

コメントを投稿