Cold BC7

A Happy New Year, Congratulation!

Destroyed thermostat water temperature control valve obliged me to drive BC7 SUBARU Legacy Legacy in cold cabin this morning. Probably the valve spring pressure supporting triangular mechanical construction must be destroyed and the valve is kept opened, cruising in the cold temperature pushes down the stylus of water temp. meter soon.
Parts supplies would be closed till 9th this month, so the repairing would be postponed until over 10 days later.

The control valve parts replacement must invite the change of water temp. meter stylus position at adequate stable temperature, the marking must be moved in the meter cluster.
Trifle but complicated procedures are waiting, not only the parts setting but also LLC replacement would be added, though I had made desperate efforts on replacing ABS unit and on following procedures, again must I do that, one after another? I will continue, if my Xanthippe mocks as, "You unnecessarily use too long consistently!".

Thick and heavier lens designing construction as one of a Ernostar type, M-Tele-Elmar 135/4 has been providing fine pictures since silver salt film period of time.
Sharpness, resolution, aberrations correction and color separation are acceptable for me and the blurs on anterior and posterior are also acceptable, not so apparent in double lines blur as reported.

The dignity of picture quality as a Leica family equipment is enough to level with another expensive lenses.
Throwing away for few years permitted the mold grow inner surfaces of grasses, though it does not affect on the picture production, I will clean the surfaces by disassembling the lens elements with DIY method.